What the Aperion Wall Mount Pair Includes
The Aperion Wall Mount Pair (model AWM) is sold as a set of two complete mounting kits, each designed to hold one bookshelf or surround speaker. Each mount comes fully assembled with all necessary hardware for attaching to Aperion speakers. The dual mounting points on the bracket are spaced 60 mm apart, matching the threaded inserts on the back of Aperion bookshelf and surround models.
Compatibility and Capacity
- Aperion Wall Mount Pair - Bookshelf and Surround: This Swivel Wall Mount is compatible with all Aperion speakers, as well as many other brands. If you own Aperion speakers, the mount works out of the box. For other brands, you must verify the mounting hole spacing and weight capacity.

Aperion Wall Mount Pair - Bookshelf and Surround - Aperion Wall Mount Pair - Bookshelf and Surround: The wall mount weight capacity is 22 lbs. Each mount can safely support a speaker weighing up to 22 lbs. Check your speaker's weight before installing.
- Aperion Wall Mount Pair - Bookshelf and Surround: The spacing between the dual mounting points which connect to the speaker is 60 mm. The bracket's screw holes are 60 mm apart. If your speaker's threaded inserts match this spacing, the mount will attach directly. If not, you may need an adapter plate or a different mount.
Installing the Aperion Wall Mount Pair
Follow these steps to mount your bookshelf or surround speakers securely. Always mount directly into a wall stud for maximum security.
- 1. Locate wall studs: Use a stud finder to locate the studs where you plan to mount each speaker. The mount's weight capacity (22 lbs) assumes a solid anchor into wood or metal studs. If you cannot mount into a stud, exercise caution with drywall anchors.
- 2. Attach the wall plate: Hold the wall plate of the mount against the wall at your desired height and level it. Use the supplied screws to secure the plate to the stud. The mount comes with all necessary hardware for Aperion speakers.
- 3. Connect the speaker bracket: The mount has a bracket that attaches to the back of the speaker. Align the bracket's dual mounting points with the threaded inserts on the speaker (60 mm spacing). Use the provided screws to fasten the bracket securely.
- 4. Hang the speaker: Lift the speaker and engage the bracket with the wall plate. The mount swivels, allowing you to angle the speaker toward the listening area. Ensure the speaker is fully seated and stable before releasing.
- 5. Route and connect speaker wire: Run speaker wire from your amplifier to the speaker. Some users route wire along the wall or through a cable management channel. The mount does not include wire management provisions, so plan your cable path before finalizing placement.
Using with Non-Aperion Speakers
The mount is advertised as compatible with many other brands, but you must verify two things: the weight of your speaker must not exceed 22 lbs, and the mounting hole spacing on the speaker must match the 60 mm distance between the bracket's dual points. If your speaker uses a different insert pattern, this mount will not attach without modification. The supplied hardware is designed for Aperion speakers; for other brands, you may need to supply your own screws.
Alternative Mount: Aperion Stealth Mount
If you need a mount that can handle heavier speakers or want a low-profile ceiling installation, consider the Aperion Audio Stealth Mount Kit. It supports up to 60 lbs per mount and works with A5 Atmos, Novus Slim, and Aperion surround/bookshelf speakers. The Stealth mount uses a two-plate interlocking design that leaves a 14.5 mm gap for wire routing. However, the Stealth mount does not swivel like the Wall Mount Pair, so choose based on your need for adjustability versus weight capacity.


