How to Mount Bookshelf Speakers on Walls with Aperion Brackets

By Aperion Audio: Premium Home Audio Speakers, Subwoofers ... | Published: 2026-10-19

Category: How-to Guides

Learn how to securely mount bookshelf speakers on walls using Aperion wall mounts and the Stealth kit. Step-by-step instructions for a clean, safe installation.

Quick answer

Use an Aperion wall mount pair or the Stealth mount kit to securely attach your bookshelf speakers to drywall or studs. The right bracket and careful installation keep your speakers stable and your sound clear.

Which Aperion bracket should you choose?

The Aperion Stealth Mount Kit (pair) is designed specifically for Aperion speakers like the Novus Slim and A5 Atmos, with a two-plate system that hides behind the speaker. It offers a low-profile, fixed-angle mount ideal for flush placement against the wall or ceiling.

The Aperion Swivel Wall Mount (pair) is a more versatile option. It works with any Aperion speaker and many other brands, thanks to its 60 mm mounting-point spacing. The swivel head lets you tilt and rotate the speaker to aim sound precisely. This flexibility comes at the cost of a slightly bulkier appearance.

If you plan to reposition speakers later or use non-Aperion bookshelf speakers, the Swivel Wall Mount is the better choice. For a clean, permanent installation with compatible Aperion models, the Stealth kit delivers a nearly invisible look.

Key considerations before you start

Mounting bookshelf speakers on walls changes how they sound. Wall placement often boosts bass response, which can muddy the midrange. To compensate, try pulling the speaker a few inches from the wall or using the port plugs if your speaker includes them.

Always locate a stud or use drywall anchors rated for the speaker's weight. Aperion mounts include hardware for studs, but if you must mount on drywall alone, use toggle bolts rated for at least 50 pounds. The Grandis GR8 bookshelf speaker pair, for example, is a substantial speaker—confirm its weight and your wall's capacity before drilling.

Run speaker cables before mounting. Once the bracket is attached, reaching the terminals becomes difficult. Plan your cable path and leave enough slack for the speaker to be lifted onto the bracket.

Step-by-step installation guide

1. Choose the mount and mark the position: Select the Stealth kit for a flush, fixed mount or the Swivel Wall Mount for adjustable aiming. Hold the wall plate against the wall at your desired height and use a level to mark the screw holes. Common mistake: Mounting too high or low—ear level when seated is the ideal target.
2. Drill pilot holes and insert anchors: If you hit a stud, drill a pilot hole directly. If not, use a drywall anchor rated for the speaker weight. Insert the anchor flush with the wall surface. Common mistake: Using a small anchor that can't hold the speaker—check the weight rating on the anchor package.
3. Attach the wall plate: Screw the wall plate securely into the anchors or studs using the provided hardware. Tighten firmly but don't over-torque, which could strip the screw head or crack drywall. Common mistake: Leaving the plate loose—give it a gentle tug to confirm it's solid.
4. Connect speaker wires to the speaker: Strip about 1/2 inch of insulation from each wire end and insert into the binding posts. Tighten the posts by hand. For banana plugs, push them straight in. Common mistake: Forgetting to leave slack for the speaker to be lifted onto the mount—cut the wire too short and you'll have to redo it. Test the connection by gently pulling each wire to ensure it's secure.
5. Attach the speaker plate (Stealth kit only): If using the Stealth kit, screw the back plate onto the speaker's mounting holes. For the Swivel mount, skip this step—the bracket attaches directly to the speaker's threaded inserts. Common mistake: Overtightening the screws, which can crack the speaker cabinet.
6. Hang the speaker on the wall plate: Lift the speaker and align the back plate (Stealth) or bracket slots (Swivel) with the wall plate. Lower it gently until it locks into place. For the Swivel mount, tighten the locking screw to prevent accidental dislodging. Common mistake: Not fully engaging the lock—give a gentle push to confirm it's seated. Double-check that the speaker is level and stable before letting go.

Product facts

Aperion Audio Stealth Mount Wall & Ceiling Speaker Mount Kit - Pair - A5, Bookshelf and Surround: The Aperion Audio Stealth mount kit includes a back plate that attaches to the speaker and a wall plate that screws into the wall or ceiling. This two-piece design lets you hang the speaker securely without visible hardware, giving a clean, professional finish.
Aperion Audio Stealth Mount Wall & Ceiling Speaker Mount Kit - Pair - A5, Bookshelf and Surround
Aperion Wall Mount Pair - Bookshelf and Surround: The Aperion Swivel Wall Mount has 60 mm spacing between the dual mounting points and is compatible with all Aperion speakers plus many other brands. You can tilt and rotate the speaker to direct sound exactly where you need it, making it ideal for rooms with off-center listening positions.
Aperion Wall Mount Pair - Bookshelf and Surround