Theatrus TC65 as Height Speakers: FAQ and Setup Tips

Quick answer

Yes, the Aperion Theatrus TC65 works well as height speakers for Atmos or surround setups. Position them at ear height for surround or above ear level for height channels, and angle them toward the listening position.

TC65 height speaker FAQ

Where should I place TC65 height speakers?

For Atmos height channels, mount them above ear level, either on the wall or ceiling, angled toward the main listening position. For surround channels, place them at or slightly above ear level on side or rear walls. Measure your room and mark positions before cutting or drilling.

Can I use the TC65 as both height and surround speakers?

Yes. The TC65 works for both roles, but if you use it for height channels, you may need separate surround speakers. For a balanced setup, match the timbre of your front and surround speakers where possible. Check your receiver's channel configuration to assign the TC65 correctly.

How do I wire the TC65 for height channels?

Run speaker wire from the receiver's height channel outputs to the TC65 terminals. Ensure correct polarity (+ to +, - to -) and use quality wire. If mounting in a ceiling, use fire-rated wire and secure the speaker firmly. Use a wire tester to confirm polarity before final mounting.

Is the open-box TC65 a good value for height speakers?

Open-box units are inspected and may show minor cosmetic wear, but they function like new. The price is lower than the original, making it a cost-effective way to add height channels without overspending. Inspect the open-box unit for any cosmetic damage on arrival.

What is the ideal height for Atmos height speakers?

For Atmos, place height speakers above ear level, typically 2 to 3 feet above the listening position, and angle them down toward the listener. Avoid placing them too high, which can reduce impact. Adjust the angle after installation for best soundstage.

Product facts

• Theatrus TC65 Height/Surround/Ceiling Speaker Pair (Open Box): The TC65 is a 2-way design with an AMT ribbon tweeter, built for home theater and custom installation. The ribbon tweeter delivers crisp high frequencies that height channels need, and the construction is made for permanent mounting.